Home › Blog › Turf types and grades
Which Artificial Turf Holds Up in Phoenix? Types, Grades and the Warranty Fine Print

Short answer: most people buy artificial turf because they want a lawn that looks good every day of the year and never has to be replaced. In the Phoenix Valley, the turf that delivers that is a dense polyethylene lawn with strong UV protection, a perforated backing and a manufacturer's warranty that actually applies in Arizona. Budget turf can look the same on install day. The difference shows up after a few summers, and in Phoenix the summers are harder on turf than almost anywhere else in the country.
This guide explains what the types and grades mean, how each one holds up in Valley heat, sun and monsoon storms, and what to read in a warranty before you sign.
Why Phoenix Is Hard on Artificial Turf
The test industry already knows the answer. Companies that need to find out how fast a material breaks down in the sun send samples to an outdoor test site in central Arizona, about 30 miles north of Phoenix. Atlas Material Testing, one of the large test labs, lists that site at about 334 megajoules per square meter of UV radiation a year, compared with about 280 at its South Florida site. Arizona is where products go to age quickly.
Heat is the second problem. Phoenix had 70 days at or above 110°F in 2024, the most on record, and a run of 113 straight days at or above 100°F from May 27 to September 16 that year, according to the National Weather Service. Turf in direct sun gets far hotter than the air, so for months each year the yarn, the backing and the glue that holds them together run much hotter than the forecast.
Then add monsoon storms that drop heavy rain in a short time, dust storms that leave grit in the blades, and the dogs and kids who use the yard every day.
Some Turf Warranties Shrink or Disappear in Arizona
This is the part almost nobody tells homeowners. Manufacturers know how hard Arizona is on turf, and some of them write it into the warranty.
- TigerTurf's 15-year warranty page states it is "NOT APPLICABLE IN ARIZONA" and tells buyers to ask a sales rep for the Arizona-specific warranty.
- Turf and Ivy Solutions gives residential lawns a 15-year limited warranty in other states, but its warranty document says it covers turf sold and installed in Arizona for 3 years, "due to the extreme hot weather conditions."
Read the rest of a typical turf warranty and the coverage narrows further. TigerTurf's standard warranty is prorated, paying 100 percent in years 1 to 8, 50 percent in years 9 to 12 and 25 percent in years 13 to 15. It counts the turf as failed from UV only when the yarn has lost more than half its original tensile strength, and it excludes melting from reflective Low-E windows and matting of any kind. The Turf and Ivy warranty excludes damage caused by dogs and melting from reflected heat, treats matted or twisted blades as normal wear, and makes the homeowner pay all labor to remove and reinstall a replacement.
So a "15-year warranty" can mean very different things. Before you choose a turf, ask for the actual warranty document for that product, check whether it applies in Arizona, and read how it defines failure. That applies to every installer, including us.
The Main Types of Artificial Turf
Turf is sold by use, and each use calls for a different build.
Landscape lawn turf is what most front and back yards get. It has a longer, softer pile made to look like a real lawn, usually with a curly brown or tan thatch layer near the base that helps the blades stand up and makes the lawn look more natural.
Pet turf is lawn turf built for dogs. It has a shorter, denser pile that is easier to clean, a backing that drains quickly, and it is usually paired with an infill that helps control odor.
Putting green turf is short, dense and often made from nylon so the ball rolls true and the surface stands up to foot traffic around the cup. It is a different product from lawn turf and shouldn't be swapped for it.
Play and sports turf is made for heavy, concentrated use, such as a play area or a backyard practice space. It trades some softness for toughness.
Many Valley yards combine two or three of these, for example a lawn with a putting green or a pet run. We install all of them, and we carry more than 30 turf products from six manufacturers so each area gets the right build.
What the Grades Mean: Materials and Specs
There is no single official grading system that every manufacturer follows. "Premium" and "pro grade" are marketing words. What you can compare are the numbers on the product's spec sheet.
Yarn Material
- Polyethylene is the standard for landscape lawns. It is soft, looks natural and is what most good lawn turf is made from.
- Polypropylene is the least expensive. It shows up in budget turf and in the thatch layer of better products.
- Nylon is the toughest and stiffest. It is the usual choice for putting greens and some high-traffic areas, but it is less soft underfoot than polyethylene.
For a lawn that has to look good for years in Phoenix sun, the polyethylene blades are what you are paying for, so it matters how well that yarn is protected against UV. Ask what UV stabilizers are in the yarn and how the product was tested.
Face Weight and Total Weight
Face weight is the weight of the yarn in one square yard of turf, not counting the backing. Higher face weight means more yarn, which usually means a denser lawn that resists wear and matting better.
Watch for product names that use total weight instead. MSI's own example is a turf called Viridian 91: it has a face weight of 65 ounces per square yard, and the "91" comes from adding 26 ounces of backing. When you compare two products, compare face weight to face weight at a similar pile height.
Pile Height and Density
Pile height is how tall the blades are. Longer pile looks lush, but on its own it doesn't make turf better. A tall, thin pile can look sparse and flatten faster than a shorter, denser one. Density, which depends on how closely the stitches are spaced, is what keeps a lawn looking full.
Backing
The backing holds the blades in and lets water through. Most landscape turf uses a backing punched with drainage holes. Fully permeable backings drain across the whole surface and are often chosen for pet areas. Either way, a good backing holds each tuft firmly so blades don't pull out in high-traffic spots.
Infill
Infill is the sand or coated granules brushed down between the blades. It holds the blades upright, adds weight so the turf stays put, and shields the backing from the sun. Some manufacturers require it for the warranty to be valid. Pet areas often get an infill made to absorb odor. Some infills are sold as cooling, which brings us to heat.

Heat: What Turf Grade Can and Can't Change
No grade of artificial turf stays cool in a Phoenix July. We would rather say that plainly than sell you a product on a heat claim.
A University of Nevada, Las Vegas study in the Mojave Desert recorded synthetic turf as hot as 169°F, about 69°F hotter than irrigated natural grass and 62°F hotter than the air. In Tempe, Arizona State University researchers measured a turf field built with a coconut-based cooling infill at about 152°F on a morning when the air was 95°F. They noted that typical turf may be worse.
What grade does change is how the turf survives that heat year after year: whether the yarn keeps its strength and color under the UV load, whether the backing stays intact, and whether the blades stand back up instead of matting. That is where better turf earns its price.
To keep a lawn usable in summer, plan for shade where you can, choose lighter infills, rinse the turf before kids or dogs go out on a hot afternoon, and keep reflective windows in mind. Light reflected from some energy-efficient windows can melt turf, and the warranties we read exclude that damage.
Drainage and Monsoon Storms
A perforated turf backing is rated to drain far faster than a monsoon storm can drop rain. When a turf lawn puddles, the cause is usually underneath: a base that wasn't graded to slope away from the house, a base that wasn't compacted in layers, or a hard caliche layer that stops water from soaking down. That is why the installation matters as much as the turf. We grade, build and compact the base for each yard's soil before any turf goes down.
Dogs and Kids
If dogs will use the yard, choose a turf built for pets, with a dense pile, a fast-draining backing and an odor-control infill, and plan to rinse it regularly in summer. Read the warranty for pet exclusions before you buy. As noted above, at least one manufacturer's warranty excludes damage caused by dogs entirely.
For play areas, a denser pile and a backing with a strong tuft hold stand up better to running, toys and bikes.
Why Better Turf Is the Better Value
Here is the math most quotes leave out. The cost of a turf job isn't only the turf. Removing the old lawn, capping or converting the sprinklers, grading, building and compacting the base, cutting, seaming and infilling all cost about the same whether the turf on top is a budget product or a premium one.
If budget turf fades, mats or breaks down early, you pay much of that labor again to tear it out and replace it, and as the warranties above show, labor is usually not covered. Arizona law also matters here. Under A.R.S. 33-1819, a homeowners association can set rules on artificial turf quality and can require you to replace or remove turf that isn't maintained to its standards. A lawn that looks worn after a few summers can become an HOA problem as well as an eyesore.
You likely chose turf so you would never have to think about the lawn again: no mowing, no watering, no dead patches, and a yard that looks good every day. A higher-grade turf, installed on a properly built base, is what keeps that promise in Phoenix. That is why we don't sell closeout turf. Every turf we carry comes with a manufacturer's warranty of at least 15 years on materials, and we back our installation with a 2-year workmanship warranty.
How to Compare Turf Quotes
Ask each installer for:
- The product name and spec sheet, including yarn material, face weight, pile height and backing type.
- The manufacturer's warranty document, whether it applies in Arizona, how it defines a UV failure, and what it excludes.
- The installer's own workmanship warranty, in writing.
- How deep the base will be, what it is made of and how it will be compacted.
- Which infill they will use and why.
- Whether the job needs HOA approval, and who prepares the submittal.
Frequently Asked Questions
How Long Does Artificial Turf Last in Arizona?
It depends on the turf and the installation. No independent study tracks residential turf life in Arizona, and installers quote anything from 8 to 25 years. The most useful evidence is the manufacturer's warranty for Arizona: how many years it covers, how it defines failure and what it excludes. A dense polyethylene turf on a well-built base lasts the longest.
Does Artificial Turf Fade in the Arizona Sun?
All turf changes color slightly over time, and most warranties say so. How much it fades depends on the UV protection in the yarn. Central Arizona gets so much UV that test labs use a site north of Phoenix to age materials quickly, so UV protection is the single most important quality difference for a Valley lawn.
What Face Weight Should I Get for Artificial Turf?
Face weight is the weight of the yarn per square yard, not counting backing. More face weight usually means a denser lawn that resists wear. For yards with dogs, kids or regular foot traffic, choose a higher face weight within the product line, and always compare face weight to face weight, since some product names use total weight.
Is Polyethylene or Nylon Artificial Grass Better?
For a lawn, polyethylene is usually better because it is soft and looks natural. Nylon is tougher and stiffer, which makes it the usual choice for putting greens and some high-traffic areas. Many good lawn products use polyethylene blades with a polypropylene thatch layer near the base.
Does Artificial Turf Get Too Hot in Phoenix?
Yes, in direct summer sun all artificial turf gets much hotter than the air. A UNLV study recorded synthetic turf at 169°F, and ASU measured a cooling-infill field at about 152°F on a 95°F morning. Shade, lighter infill and a quick rinse before use help. Turf grade affects durability in the heat, not whether it gets hot.
Why Do Some Turf Warranties Not Apply in Arizona?
Because Arizona's heat and UV wear turf out faster than milder climates. TigerTurf's standard 15-year warranty states it doesn't apply in Arizona, and Turf and Ivy limits Arizona turf to 3 years. Before choosing a product, ask for the warranty document that covers Arizona and read its exclusions.
Can My HOA Make Me Replace Worn Artificial Turf?
Yes, it can. Arizona law, A.R.S. 33-1819, lets an HOA adopt reasonable rules on the installation and appearance of artificial turf, including its quality, and require replacement or removal if the turf isn't maintained to the association's standards. Choosing turf that holds its color and shape is the simplest way to avoid that.
Is Cheap Artificial Grass Worth It?
Usually not for a main lawn in Phoenix. Much of the cost of a turf job is the labor and base, which cost the same with cheap or good turf. If budget turf fails early, you pay that labor again, and turf warranties rarely cover labor. Cheaper turf can make sense for a small side yard or a low-use area.
Sources
TigerTurf warranty; Turf and Ivy Solutions limited product warranty, effective January 1, 2022; Atlas Material Testing benchmark climates; National Weather Service Phoenix historical extreme temperatures; UNLV study of artificial turf surface temperatures, 2008; ASU News on sports venue surface temperatures, 2022; Arizona Revised Statutes 33-1819; MSI Surfaces on pile height, face weight and total weight.
