Agave Landscape

Outdoor Porcelain Pavers for Phoenix Valley Patios and Pool Decks

Stain-resistant porcelain for patios and pool decks, often laid over the concrete you already have.

  • Licensed, bonded and insured
  • AZ ROC 321033
  • Free on-site estimates
Backyard patio with an outdoor kitchen, fire table and pergola in the Phoenix Valley
A backyard patio, fire table and outdoor kitchen Agave Landscape built in the Phoenix Valley.

Outdoor porcelain pavers are thick, dense porcelain slabs made to be walked on outside. They give a patio or pool deck a clean, modern look, they shrug off the stains that ruin concrete and natural stone, and on many Valley homes they can go right on top of the existing concrete patio. Agave Landscape installs outdoor porcelain across the Phoenix Valley, including Belgard's porcelain line. We are a Belgard Authorized Contractor and a licensed, bonded and insured landscape contractor (AZ ROC 321033).

What Makes Porcelain Different

Porcelain is a fired clay product, the same family as indoor tile, but outdoor pavers are much thicker. Most are sold at 2 centimeters, about three quarters of an inch. Under the ANSI A137.1 tile standard, a tile only counts as porcelain if it absorbs 0.5 percent of its weight in water or less. That low absorption explains most of what people like about it:

  • Stains sit on the surface. Grill grease, red wine, sunscreen and hard-water spots from the pool wipe off instead of soaking in.
  • No sealing schedule. Concrete pavers and travertine are often sealed every few years. Porcelain does not need it.
  • The color is part of the tile. It doesn't wear off the way a painted or stained concrete surface does.

The finishes copy wood planks, limestone, travertine and concrete, in large formats such as 24 by 24 inches or long planks, so a patio has fewer joints and a cleaner look than small pavers.

Where Porcelain Works Best

Porcelain is at its best on patios, pool decks, courtyards, walkways and entries, the places people walk barefoot, eat, and spill things. It is also a good way to update a plain concrete patio without tearing it out.

It is not our first choice for a driveway. Porcelain can carry light vehicle traffic only when it is set in mortar on a concrete slab, which costs more than other driveway options. For most driveways we recommend interlocking concrete pavers, and our driveway material comparison explains why.

Built-in grill island with stone veneer on a backyard patio
Patios often tie into a grill island or outdoor kitchen, so the paving and the kitchen are planned together.

Three Ways to Install It

How porcelain goes down depends on what is there now and how the space will be used. Belgard's installation guide describes these methods, and the choice changes the cost.

Over an existing concrete patio. If the slab is sound, with no heaving, major cracks or drainage problems, porcelain can be installed on top of it. This avoids demolition and hauling, and it is often the fastest way to a finished patio. The slab's height matters, because the new surface sits higher. We check where the patio meets the house door, the pool coping and the yard before recommending it.

On a sand and crushed rock base. Where there is no slab, or the old one has to come out, porcelain can be laid on a compacted crushed rock base with a leveled sand bed. Porcelain pavers aren't run over with a plate compactor the way concrete pavers are, so the base and sand have to be compacted and screeded flat before the tiles go down. This method is for foot traffic.

Mortar set on concrete. Setting the tiles in mortar on a concrete slab makes the strongest surface, and it is the method used where a vehicle might drive.

Whichever method is used, the edges have to be held. Belgard's details call for an edge restraint so the tiles cannot creep outward over time.

Pool Decks and Slip Resistance

Pool decks are where porcelain gets the most interest and the most questions. Outdoor porcelain comes in textured finishes made for wet, barefoot areas, and these are a different product from the smooth tile used indoors. The tile slip-resistance standard, ANSI A326.3, sorts tiles by where they can be used, and its exterior wet class is declared by the manufacturer. When you choose a tile for a pool deck, ask for its exterior wet rating and look at the texture in person with wet feet in mind. We help narrow the choices to tiles meant for that use.

Around the water, porcelain is often paired with matching coping pieces so the deck runs right to the pool edge. It can also sit next to an artificial turf lawn for a clean border between the deck and the yard.

Heat Underfoot

Every hard surface warms up in Valley sun, and color matters more than material. Light porcelain colors stay more comfortable underfoot than dark ones, and a dark charcoal tile in full afternoon sun will be hot no matter what it is made of. If the deck gets full sun, pick lighter colors for the areas people walk barefoot and save darker accents for borders or shaded spots.

Caring for Porcelain

Porcelain is the lowest-maintenance hard surface we install. Sweep it, rinse it, and wash spills with ordinary soap and water. The joints between tiles may need occasional attention, depending on whether they are filled with sand, polymeric sand or grout. With no sealing, no repainting and no fading, the main job is keeping it clean.

Frequently Asked Questions

Can Porcelain Pavers Go Over My Existing Concrete Patio?

Often, yes. If the slab is sound, with no heaving, major cracks or drainage problems, porcelain can be installed over it with no demolition. The new surface sits higher than the old one, so the height at the house door, the pool coping and the yard edge has to be checked first. We look at all of that during the free estimate.

Are Porcelain Pavers Slippery When Wet?

Outdoor porcelain is made in textured finishes for wet areas, and those finishes are a different product from smooth indoor tile. For a pool deck, ask for the tile's exterior wet slip-resistance rating, which the manufacturer declares under the ANSI A326.3 standard, and choose a textured finish meant for barefoot wet use.

Do Porcelain Pavers Need to Be Sealed?

No. Under the ANSI A137.1 standard, porcelain absorbs 0.5 percent of its weight in water or less, so stains and water stay on the surface and the tile doesn't need a sealer. The joints between tiles may need occasional attention, depending on whether they are filled with sand, polymeric sand or grout.

Do Porcelain Pavers Get Hot in the Arizona Sun?

Every hard surface warms up in Phoenix sun, and color makes the biggest difference. Light porcelain colors stay more comfortable underfoot than dark ones. If your patio or pool deck gets full afternoon sun, choose lighter colors where people walk barefoot and keep darker tiles for borders and shaded areas.

Are Porcelain Pavers Good for a Driveway?

They can carry light vehicle traffic only when they are set in mortar on a concrete slab, which makes them an expensive driveway choice. For most Valley driveways, interlocking concrete pavers are the better value. Porcelain is at its best on patios, pool decks, walkways and entries.

How Thick Are Outdoor Porcelain Pavers?

Most outdoor porcelain pavers are 2 centimeters thick, about three quarters of an inch. That is much thicker than indoor porcelain tile and thinner than concrete pavers, which is one reason porcelain can often be laid over an existing patio without raising it too much.

Ready to Get Started?

Tell us about your project. We'll come out, measure and give you a written quote at no charge.