Agave Landscape

Backyard Putting Greens Built for How You Actually Practice

Practice greens with real contours and a speed you choose, framed by turf or pavers.

  • Licensed, bonded and insured
  • AZ ROC 321033
  • Free on-site estimates
Backyard synthetic putting green with flags, surrounded by lawn turf and desert plants
A backyard putting green with several cups that Agave Landscape built in the Phoenix Valley.

A backyard putting green lets you practice the shots that cost you the most strokes without driving to the course in 110-degree heat. Agave Landscape builds synthetic putting greens across the Phoenix Valley, from a small green with one cup next to the patio to a larger green with several cups, breaks and a fringe that blends into the lawn. We are a licensed, bonded and insured landscape contractor (AZ ROC 321033), and putting greens have been a specialty of ours for years.

Putting Green Turf Is a Different Product

A putting surface is not lawn turf cut short. Putting turf has a short, dense pile, often made from nylon or a textured polyethylene, so the ball rolls true and the surface stands up to the foot traffic around the cups. Lawn turf is softer and longer, and a ball will wander and stop short on it. Most of our greens use putting turf for the green itself and a lawn or fringe turf around it, so the green has a clear edge and the rest of the yard stays soft underfoot.

Choosing Your Green Speed

Green speed is measured with a Stimpmeter, a ramp that releases a ball at a set speed. The number is simply how many feet the ball rolls on a flat part of the green, so a reading of 10 means the ball rolled 10 feet. On a synthetic green, speed comes from three things: the turf product, how much sand infill is brushed into it, and how firm and smooth the base is underneath.

We ask how you will use the green before we pick the product. A family green for kids and casual practice can play a little slower and more forgiving. A golfer who wants to practice for fast course greens may want a quicker surface, which needs a firmer, smoother base to roll consistently. We talk through that choice at the estimate rather than guessing.

Putting green with a flag next to artificial lawn and a block wall
A practice green set into a lawn along the back wall.
Compacted and contoured base for a backyard putting green before the turf goes on
The finished base for a green, shaped and compacted before the turf goes down.
Small putting green with several cups beside a backyard lawn
A compact green with several cups.

Breaks, Contours and Cups

The base is where a putting green is built. Its contours are shaped into the crushed rock base before the turf goes down, then compacted until the surface is firm. Gentle slopes give you breaking putts to read, while a flat green rolls straight and is easier for beginners. The base also has to shed water after a monsoon storm, so the shape has to work for drainage as well as for golf.

Cups are set where you will use them: one near the back door for a quick few putts, others spread out to practice longer lag putts. More cups give you more variety but take more room, so it helps to mark the cup positions on the ground before anything is built.

Where the Green Goes

The best spot is usually a flat, open part of the yard you can see from the house. A few things to think about when you pick it:

  • Trees. Leaves and seed pods drop onto the green and slow the ball. A leaf blower clears them quickly, but a green right under a palo verde will need more cleanup.
  • Sun and heat. Synthetic greens get hot in summer sun, so a green that gets afternoon shade is more pleasant to use from June to September.
  • Chipping. If you want to chip onto the green, it needs a fringe around it and a firmer surface that holds a chip shot. Tell us at the estimate so we can plan the space.

How a Putting Green Is Built

  1. Lay out the shape and cup positions on the ground so you can see the size before work starts.
  2. Excavate and remove the old lawn, rock or soil.
  3. Handle the irrigation so no sprinkler sprays onto the green and nearby plants keep their water.
  4. Build the base in compacted layers and shape the contours, checking that water drains off the green.
  5. Set the cups, then lay the putting turf and the fringe or lawn turf around it.
  6. Brush in the sand infill in stages and roll the green until it plays at the speed you chose.

Pairing a Green With the Rest of the Yard

Most putting greens we build are part of a larger backyard project. A green can sit inside an artificial turf lawn, be framed with a border of concrete pavers, or run alongside a patio so you can putt while someone is at the grill. Planning the whole yard at once means the base work, irrigation changes and edges are done once instead of twice.

Keeping a Green Rolling

A synthetic green needs much less care than a natural one, but it is not zero care. Blow off leaves and debris so the ball rolls clean, brush the turf occasionally to keep the infill even, and top up sand in the spots that get the most traffic, usually around the cups. If the green starts to play slower than it used to, a fresh brushing and a little added infill usually bring it back.

Wide view of a backyard putting green with ornamental grasses in the foreground
The same green from the patio, with the lawn and plantings around it.

Frequently Asked Questions

How Much Space Do I Need for a Backyard Putting Green?

You can fit a useful green with one or two cups into a fairly small area along a patio or side yard. A larger green gives you room for more cups, longer putts and breaks. The best size depends on how you practice and what else the yard needs to do, so we measure and lay out options during the estimate.

How Fast Will My Putting Green Roll?

You choose. Speed is measured with a Stimpmeter, which reads how many feet a ball rolls on a flat section. On a synthetic green, the turf product, the amount of sand infill and the firmness of the base set the speed, and infill can be adjusted after installation to make the green a little faster or slower.

Can I Chip Onto a Synthetic Putting Green?

Yes, if the green is built for it. A green that will take chip shots needs a firm, well-compacted base, a putting turf that holds a ball when it lands, and enough fringe around it to practice from. Tell us before the design so we can plan the size and the surrounding turf.

Does a Putting Green Get Hot in the Summer?

Yes. Like all synthetic turf, a putting green in direct Phoenix sun gets much hotter than the air. Placing the green where it gets afternoon shade, and putting in the early morning or evening during summer, makes it more comfortable to use.

What Maintenance Does a Synthetic Putting Green Need?

Very little. Blow off leaves and debris so the ball rolls clean, brush the surface now and then to keep the infill even, and add sand around the cups where traffic wears it down. There is no mowing, watering or fertilizing.

Can You Add a Putting Green to My Existing Turf Lawn?

Often, yes. The section of lawn turf is removed, the base under it is reshaped and compacted for putting, and the putting turf is seamed in with a clean edge. Whether it works depends on the condition of the existing base and turf, which we check on site.

Ready to Get Started?

Tell us about your project. We'll come out, measure and give you a written quote at no charge.